AND Weighing Indicator AD-4401, Instruction Manual

Page: 12 / 90

10
2-6 REAR PANEL
(a) Connects the thumbwheel switch or setpoint unit (OP-05) to set a setpoint required for a weighing sequence.
See 8-2 and 9-4.
(b) Inputs/outputs the signals such as tare subtraction input, each loading output required for the weighing sequence.
The capability of each terminal can be changed freely. See 8-1.
(c) Provides an output for the standard serial interface (current loop).
(d) One of the following options can be attached;
OP-01 BCD output, OP-03: RS-422/-485 input/output, OP-04: RS-232C input/output
(e) Connects to the power source. Confirm the description on the supply voltage label. See 3-2.
(f) Provides an analog output if option OP-07, analog output, is attached. Use a shielded cable for wiring.
(g) Connects to the load cell. Use a shielded cable for wiring. See 3-3.
Be sure to attach a cover to the terminal block on the rear panel in order to prevent an accident.