49
19.2.2. To Changing the Function Table in
gUe5t
1. Press the MODE key to select the
gue5t
, and then
press the TARE key to display
func
⋆
.
2. Press the TARE key to display the class. Refer to the
table below to change items or set details. Refer to ”
List of Parameters that can be Changed in
“ regarding precision weighing.
19.2.3. List of Parameters that can be Changed in
gue5t
Class
Item
Parameter
Content/use
func
Automatic power off function
poff
0
OFF
1
ON (Turns off after 5 minutes)
2
ON (Turns off after 10 minutes)
3
ON (Turns off after 15 minutes)
4
ON (Turns off after 30 minutes)
5
ON (Turns off after 60 minutes)
Automatic power on function
p-on
0
OFF
1
ON (The scale turns on automatically if the power
plug is connected.)
Zero tracking function
trc
0
OFF
1
ON
Backlight control
l-it
0
Always turned off
1
Always lit
2
Brightness decreases at 1 minute after stabilizing
3
Brightness decreases at 5 minutes after stabilizing
4
Brightness decreases at 30 minutes after stabilizing
5
Brightness decreases at 60 minutes after stabilizing
Backlight brightness
l-i
0
Dark
1
↑↓
2
↑↓
3
Bright
:
factory settings
d: readability (scale interval or "division")
Automatic power off: Turns the display off when the specified interval has passed, while the value is
zero, the display is stable and there is no key operation.
Keys
Content
Moves to the next item.
Increases the blinking digit by 1.
Sets the parameter.
