42
18. ID Number and GMP, GLP
The ID number is used to identify the scale when Good Manufacturing Practice (GMP) or Good
Laboratory Practice (GLP) is used. Using the USB cable or optional FG-27CWP Bluetooth
communication interface, the data corresponding to the following GMP or GLP can be output to a
printer or PC.
□
Results of calibration (“Calibration Report”)
□
Results of calibration test (“Calibration Test Report”)
□
“
Start Block” and “End Block” for GMP, GLP data
18.1. ID Number Setting Procedure
1. With the display turned off, while pressing and holding the
TARE key, press the ON/OFF key to turn the display on
and display the class
func
. Use the MODE key to
select the class
id
, and then press the TARE key.
2.
Refer to the table below to change items or set details.
3. Press the TARE key to store the setting.
pa55wd
appears after
end
.
□
To cancel the restoring procedure, press the ZERO key.
Display Character Table
0 1 2 3 4 5 6 7 8 9 -
␣
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 - _ a b C d e f g H i j k l m n o p q r s t U v w x y z
“
␣
”
：
Space, ASCII 20h
Key
Content
Moves to the next item.
Increases the blinking digit by 1.
Sets the parameter.
Press
Press
Press
