18
10.4. Setting HI/LO value
1.
Press and hold the SAMPLE key while in mass
display to enter comparator setting mode and push
the PRINT key to change the memory number
display.
2. Press the MODE key. LO is lit and the lower limit
value is displayed.
3. Press the TARE key. The digit of the value blinks.
Change the value with the keys below.
□
Example of changing setting
4. Press the TARE key to display
end
, HI is lit
and the upper limit value blinks.
5. Change the upper limit value in the same way you
adjusted the lower limit.
6. Press the TARE key to display
end
and
return to
the memory number display
.
7. Press the TARE key to return to weighing
mode after
end
is displayed. (Start comparing
using the memory number displayed at this time.
）
key
Content
Moves the blinking digit.
Increases the blinking digit by 1.
Sets (stores) the parameter.
Press
HI
OK
LO
Press
HI
OK
LO
HI
OK
LO
Press
HI
OK
LO
HI
OK
LO
Press
STABLE
ZERO
Press
