Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 96 / 164

80 Release: 2017 CyBio
®
Well vario
Operation
Waiting time
Because of the small opening of tips and the resulting resistance they offer to the flow
of liquid, a reasonable time setting should be added to allow for pressure compensation
during aspiration or dispensing cycles. Too small settings for waiting time may reduce
precision.
Note:
A
waiting time which is set in this menu will only be valid for manual mode.
Table motion path
For defining a maximum available length of table motion (lifter height). This setting pre-
vents mechanical collision of a vessel with tips. It also facilitates different applications,
for example, the picking up of liquid over a cell lawn or the pipetting onto the bottom
of a microplate from a preselected distance. The height position can be adjusted in
steps of 0.1 mm.
dZ
For updating the vertical setting value for the lifter following necessary replacement of
the lifter (setting value inscribed on lifter bottom on shipment). This will automatically
correct vertical lifter adjustment so previously edited programs need not be changed in
terms of height coordinates.
CAUTION
There is danger of tips suffering damage or getting destroyed!
A value setting for lifter height will only be effective in manual mode so it may be ex-
ceeded in software-controlled operation mode!