Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 125 / 164

CyBio
®
Well vario Release: 2017 109
Fault Removal
Wrong parameters Software transferred
wrong parameters to sys-
tem.
Check that available soft-
ware version is actually
configured for your system
(refer to Hardware system
information window in
[Devices] ) menu.
Check system connections
for proper state.
On failure to remove this
error, you should notify
the customer service.
Error on calculating motor
characteristic.
Value settings for system
motor characteristic are
unrealistic.
Correct parameter settings
as necessary.
Error on communicating
with interface
Interface transmission
error which cannot be
located in greater detail.
Check PC and system for
proper connection.
Check configuration of
serial interface and PC.
Error on horizontal drive
motion
Horizontal motion was
obstructed by incorrectly
seated microplate.
Remove microplate and
mount it correctly.
No residual ejection After aspiration of a vol-
ume, there was no residual
ejection of dosing stock
during the remaining pro-
gram sequence. On com-
pletion of a program,
there must be no dosing
liquid left in the pipette
tips.
Ad a [Dispense with
additional stroke] com-
mand at the appropriate
point in a sequence.
Faulty horizontal position Command includes invalid
setting for horizontal posi-
tion.
Check your
software and hardware
configurations for mutual
agreement (refer to Hard-
ware system information
window in [Devices] )
menu.
Faulty height Command includes invalid
height specification.
Check your
software and hardware
configiurations for mutual
agreement.
Error message Cause Action for removal