Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 122 / 164

106 Release: 2017 CyBio
®
Well vario
Fault Removal
11 Pump drive has reached
upper limit position.
You may be able to remove
this error by performing an
exchange of tips.
Note:
On
repeated occurrence of
this fault, repair work is nec-
essary!
12 Pump drive has reached
lower limit position.
You may be able to remove
this error by performing an
exchange of tips.
Note:
On
repeated occurrence of
this fault, repair work is nec-
essary!
15 The lifter cannot find its
internal lower zero position.
Turn power supply off and
on again.
Note:
Repair work is necessary if
error occurs repeatedly.
16 Error by external device,
(plate transfer unit, drip-
catcher)
Turn power supply off and
on again.
Note:
Repair work is necessary if
error persists.
18 Host computer triggered
command that requires more
parameters.
Check software for this com-
mand.
20 Operator break of running
program sequence.
21 Error on calculating motor
characteristic.
Parameter settings cannot be
carried out. Select new
parameters.
22 Error on carriage motion or
rotary table motion.
Remove obstacle or clean
carriage and transport rails or
rotary table.
24 Command cannot be exe-
cuted at this moment.
Wait until previous com-
mand has finished.
26 Z-drive motion error Turn power supply off and
on again.
27 Failure to detect pipetting
head.
Unseat pipetting head once
again, then restore it to
working position.
Turn system power off and
on once again.
Error/Error code Cause Action for removal