Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 49 / 164

CyBio
®
Well vario Release: 2017 33
Technical Description
4.2.9 Compressed Air Control Unit with vacuum suction
For compressed air supply, oil-free compressed air of a maximum 5 bar (0.5 MPa;
73 psi) pressure must be available on site. The compressed air control unit is mechani-
cally attached to the system frame. Customer Service personnel will connect the com-
pressed air supply tube to the system via the compressed air control unit with vacuum
suction (
→
Fig. 17 ) and adjust the specified operating pressure of
1.72 bar (0.172 MPa; 25 psi).
Fig. 17: Compressed air control unit with switch for Capillary Wash Station
vacuum suction
CAUTION
Faulty pressure settings may damage the system!
Pressure settings made by Customer Service personnel must not be changed! Make sure
that the counterlocking nut below the setting wheel is properly tightened. In the event
of damage that can be shown to result from unauthorized changes in operating pres-
sure, Analytik Jena AG will refuse any liability!
NOTE
If the operating pressure setting is too small, the CyBio
®
Well vario with capillary head
may provide only restricted functionality and capabilities.
1 Manometer
2 Warns of compressed air
3 Electric vacuum valve
4 Tube connector compressed air supply
5 Compressed air regulator
6 Tube connector Capillary head
7 Tube connector vacuum suction
8 Condensate collector
1
2
3
4
5
6
7
8