Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 89 / 164

CyBio
®
Well vario Release: 2017 73
Operation
Fig. 61: Tip magazine change (for head replacement from the front)
3. Insert a magazine plate with tips until mechanical stop position. Make sure that
the magazine uniformly sits on the frame at all points. If the magazine is found to
be correctly seated, you can trigger a magazine plate clamping cycle.
Note:
If the magazine is not properly seated, the microswitch will be triggered and an "Insert
magazine (with tips)" prompt appears on the screen.
Fig. 62: Display screen – tip change – magazine insertion
4. Confirm clamped state by pressing key .
Fig. 63: Display screen – tip change – tightening of tips
1 Magazine plate
2 Pipette tips
CAUTION
There is danger of piston or system damage!
Remember that only tip-filled magazines may be inserted and clamped! Insertion of a
magazine is monitored by a microswitch. If a magazine is inserted in a non-conforming
manner, an "Insert magazine (with tips)" prompt will appear.
Should the microswitch fail to respond, pipettor parts, notably, the pistons may suffer
damage. Shut the system down and promptly notify the manufacturer in this case.