Analytik Jena aj CYBERTRON InnuPure C12, Manual

Page: 10 / 47

Device description and functional principle
Construction and connections
8 Issue 01/2011 InnuPure C12
3 Device description and functional principle
3.1 Construction and connections
Front view
1 Status LED's
2 Display
3 Switch for sample
compartment light
4 Front door
5 Sample tray
6 Admission of sample
Tray
Fig. 3-1 Front view of the InnuPure C12
1 Ceramic pistons
2 Removing tips
3 Tip adapter
4 Sample tray
Fig. 3-2 View inside of InnuPure C12
Via the admission (6 in Fig. 3-1) of the sample tray (5 in Fig. 3-1) in the front
door (4 in Fig. 3-1), all necessary pre-filled strips (containing all buffer
solutions), the tips, the Elution Tubes and the samples are placed to the right
position inside the device. The sample tray is moved inside the InnuPure C12,
by what the tips and the solutions can be taken up in the right order. Thereby
the sequence and volumes of the single pre-filled buffers and the sample are
depending on the isolation protocol, which is installed on the InnuPure C12.