Analytik Jena aj CYBERTRON InnuPure C12, Manual

Page: 19 / 47

Commissioning and powering up
Preparation of the sample tray
InnuPure C12 Issue 01/2011 17
5.4 Preparation of the sample tray
Nickel allergy!
The sample tray is coated by nickel.
1, 3 Reagent Strip holder
2
Pre-filled Reagent Strips
4, 6 Clamp of the lock
5 Waste Box for MFR filter tips
7 MFR filter tips
8 Elution Tubes
Fig. 1 Sample Tray
Loading of sample tray
Before an extraction process can be started, the tray has to be pre-loaded with
additional equipment, as shown below or described in detail in the user manual
of each special purification / isolation kit.
1. Place the Waste Box into the Sample Tray.
2. Position the Reagent Strips inside the slots of the Sample Tray. Legen Sie
die Reagenzien-Strips in die Vertiefungen des Proben-Trays.
Note:
The label "AJ" on the Reagent Strip has to be positioned torwards to the
Waste Box.
Fig. 2 Correct position of the Reagent Strips inside the Sample Holder.