Analytik Jena aj CYBERTRON InnuPure C12, Manual

Page: 29 / 47

Operation
Cancel or continue a running program
InnuPure C12 Issue 01/2011 27
4. During the isolation protocol is running, the
following comments are displayed on the screen:
[DNA_01] Name of the chosen isolation protocol
[Total time] Time of the whole protocol until finish
[Remaining] Remaining time until finish
[Bind] Current running step is shown
[00:29] Remaining time of current step
5. After the isolation protocol is finished, the
message 'program finished' appears and the tray
with the purified samples will be moved out
automatically.
Additional a 3times peep is audible.
ENTER/Start 6. Confirm with [ENTER/Start] and the 'Protocol list'
is shown again.
7.5 Cancel or continue a running program
ESC/Stop 1. If the button [ESC/Stop] is activated during a
running isolation routine the shown screen
appears.
Continue an interrupted protocol
ENTER/Start 2. Press [ENTER/Start ] to continue the interrupted
isolation protocol.
Cancel a running progress completely
ESC/Stop 3. Press [ESC/Stop] to cancel the running isolation
protocol completely.