Operation
InnuPure C12 tools
InnuPure C12
Issue 01/2011
25
7.3.3 Remove sample tray
Note
After an isolation routine is finished, the sample tray is moved out automatically.
ENTER/Start
1. Use cursor down
[
]
to select 'Tools' inside the
main menu and confirm with pressing
[ENTER/Start]
.
The 'Tools' screen appears
2. Use cursor down
[
]
to select 'Tray out' and
confirm with pressing
[ENTER/Start]
.
3. During the progress the shown screen appears;
the tray is moved out of device.
4. After the tray was moved out the 'Tools' are
displayed again.
Note!
Pressing against the tray and the noticeable resistance will activate the soft
touch; the sample tray could now be easily removed from the device.
7.3.4 Move magnets out
ENTER/Start
1. Use cursor down
[
]
to select 'Tools' inside the
main menu and confirm with pressing
[ENTER/Start]
.
The 'Tools' screen appears.
2. Use cursor down
[
]
to select 'Magnet out' and
confirm with pressing
[ENTER/Start]
.
Summary of Contents for aj CYBERTRON InnuPure C12
