Analytik Jena aj CYBERTRON InnuPure C12, Manual

Page: 36 / 47

Up-date of the InnuPure C12
Up-load of isolation protocols to InnuPure C12
34 Issue 01/2011 InnuPure C12
8.8.1 Copy isolation protocols
1. Press/activate the shown button [Copy] .
2. Choose the isolation protocol, which has to be transferred inside the list 'PC
protocols' or inside the list 'Device protocols' and press accordant button:
[Arrow left] Copy isolation protocol to main window list 'PC protocols'.
[Arrow right] Copy isolation protocol to main window list 'Device
protocols'.
8.8.2 Move isolation protocols
1. Press/activate the shown button [Move] .
2. Choose the isolation protocol, which has to be transferred inside the list 'PC
protocols' or inside the list 'Device protocols' and press accordant button:
[Arrow left] Copy isolation protocol to main window list 'PC protocols'.
[Arrow right] Copy isolation protocol to main window list 'Device
protocols'.
8.9 Up-load of isolation protocols to InnuPure C12
The option [Upload] of the InnuPure C12 has to be used to save all isolation
protocols, which are shown in the main window list 'Device protocols' on the
internal device memory.
To save new isolation protocols on the device it is necessary to move (
→ "Move
isolation protocols" p. 34") or to copy ( → "Copy isolation protocols" p. 34) from
the 'PC protocols' list to the 'Device protocols' list.
Attention! Risk of data loss!
With each up-load process the whole internal memory of the InnuPure C12 will
be overwritten! Only the isolation protocols, which are shown in the 'Device
protocols' list will be saved on the device!
Before starting an up-load process, it is recommended to download all isolation
protocols from the InnuPure C12, as mentioned in chapter "Download of
isolation protocols from InnuPure C12" on page 33.
A new isolation protocol could be installed on the InnuPure C12, after the
isolation routine was loaded to the main windows list 'PC protocols' as
described in section → "Loading of isolation protocols" p. 33.