Analytik Jena aj CYBERTRON InnuPure C12, Manual

Page: 40 / 47

Care, maintenance
Changing fuses
38 Issue 01/2011 InnuPure C12

After finishing the cleaning of the magnets and if they are completely
try again, initialize the device ( → "Initialization" p. 23).
9.2 Changing fuses
Electric shock!
Disconnect the mains plug before changing the fuses!
If the fuses in the InnuPure C12 are defective they can be replaced.
1. Switch off the InnuPure C12 and disconnect the mains plug from the
connector on the InnuPure C12.
2. Open the fuse holder by pulling on its lid.
3. Replace the defective mains fuses. Use the following fuses:
• 2 x T 2.0 A/H; 250 V
4. Close the fuse holder.
5. Connect the InnuPure C12 to the mains.
6. Switch on the InnuPure C12.
1 Mains switch
2 Fuses
3 Fuse holder
Fig. 9-1 Fuse holder
1
2
3