Operation
26
Edition 06/2015
InnuPure C16
2.
Place the reagent plate into the hold-
er of the sample tray. The red line on
the cover film must point to the red
dot at the holder.
3.
Place the adapter for the reagent
strips into the holder. The red mark-
ing on the adapter must also point to
the red point at the holder here.
Caution:
Load the sample tray evenly in both
adapters (see below)!
4.
Place the strips into the adapter. The
long tab marked with the label "AJ"
must point to the engraved numbers
on the sample tray.
5.
Fold down the holding-down clamps
to prevent the plates and strips being
pulled out of the holder during the ex-
traction process.
