Transport and storage
InnuPure C16
Edition 06/2015
55
The side walls are to be mounted so that
the direction arrows of the printed symbols
are pointing upwards.
Pack the InnuPure C16 as follows:
1.
Remove remaining consumables from the InnuPure C16.
2.
Switch off the device and disconnect the mains plug from the InnuPure C16.
3.
Insert the sample tray (1), the priming
station (2) and the adapters for rea-
gent strips (3) (optional) into the spac-
es in the accessory box provided.
4.
Place the foam cover onto the sample
tray and place the insert into the prim-
ing station.
5.
Place the HID-Pro 320 into the open-
ing of the insert for the priming station.
6.
Mount a short and a wide side wall on
the pallet.
7.
Place the foam frame for the device
base onto the pallet.