23
www.analogway.com
USER MANUAL
4.1.6.1
Network configuration for Picturall Pro
Fig. 16 -
Network configuration (Picturall Pro with dual network interface and 10GB option)
Picturall Pro has supports two different networks. Enable the
Secure mode
to prevent incoming connections.
Note: At least one interface must be enabled and at least one interface must be non-secure.
An additional 10GB network ethernet interface is available as an option for the Picturall Pro.
The 10GB network option can be set either to secure or non-secure network.
4.1.7
Time Settings
The system time and date can be set manually, or the server can be configured to acquire time and date from
a NTP server. Time zone must be configured manually. These time settings are used for Wallclock timecode
provider and cue scheduling features (See
9.6 Triggering cues with Timecode
page 72 and
page 77)
Note: Cue scheduling occurs in server time, date and time zone.
Fig. 17 -
Server time settings configuration
Note: By default, the system is set to UTC Time zone. If unchanged, the default scheduling will occur based on UTC time.
