83
www.analogway.com
USER MANUAL
9.10.2.4
Macro content and Custom macro command
When creating a cue macro, the content of the macro is displayed in the Macro content section.
Fig. 63 -
Macro content
Cue macros are written in
Lua
scripting language, and support complex interactions. For example, a single
custom macro can be used to trigger multiple cues and playbacks and send a network command.
Tip: - Click an action to load a command then click custom macro to edit the content.
- The command list is available in a document enclosed to this User Manual.
To create a custom cue macro:
1.
If needed, click any action to load the content.
2.
Click
Custom macro
.
3.
Edit the content to create a custom command.
4.
Click OK.
Note: Custom macro does not have syntax validation. Enter custom commands carefully.
9.10.3
Edit or remove a cue macro
To edit a cue macro:
1.
Right-click a Cue or a Cue stack then click
Edit macro…
2.
Edit the cue macro then click
OK
.
To remove a cue macro:
1.
Right-click a Cue or a Cue stack then click
Edit macro…
2.
Click
Remove macro
.
9.10.4
Create cue macros using Lua commands
For more information, see the document
Cue_Macro_Lua_API.pdf
attached to this manual.