86
www.analogway.com
USER MANUAL
10.3
Performance
Fig. 67 -
Performance menu
In the
Performance
menu, monitor the performance of the system as graphs.
Use the
Enabled
checkboxes to show/hide the corresponding graphs.
Tip: These metrics are useful to show potential problems.
Graph
Description
CPU
Average workload.
“1”
means the load is equivalent to a single CPU core being fully loaded.
“8”
means that 8 cores are fully loaded.
If the value is higher than number of CPU cores installed, the CPUs is doing more than it can
handle. However, this value does not reflect the smoothness of the playback. The average
workload can get high without affecting playback quality.
CPU_TEMP CPU temperature in Celsius degrees.
GPU
GPU refresh rate. The server unit’s performance is fine if the indicator values match the
display’s refresh rate. In this example the display refresh rate is 60.
GPU_DRAW
Time it takes GPU to draw one single frame. If GPU_DRAW reaches 80% of GPU_SWAP,
lower GPU load (effects, resolutions, active layers).
GPU_MEM The amount of memory used by the GPU.
GPU_SWAP
Time it takes GPU to show one frame (except when Triple buffering is enabled). This should
always be 16.67 ms for 60Hz displays.
GPU_TEMP GPU temperature in Celsius degrees.
GPU_TEX
The amount of data transferred to the GPU (in megabytes per second).
Table 9 -
Performance
