19
www.analogway.com
USER MANUAL
4.1.4.1
Set Auto mode for the whole output card
In Auto mode,
sets all plugs of the same output card (GPU) to follow EDID.
Tip: In Auto mode, connect and power all the relevant displays before booting the media server.
1.
In
Setup
, select Auto.
2.
Per output plug, select Auto to follow EDID (or Disable the output if needed).
3.
If needed, select
Signal: HDMI
to force the HDMI signal on any DisplayPort output (adapter needed).
4.1.4.2
Set Manual mode per output plug
In Manual mode, set each output plug manually.
1.
In
Setup
, select Manual.
2.
Per output plug, select the Display mode:
o
Disabled
: disable the output
o
Manual
: set the output resolution and refresh rate manually
o
Custom
: select a custom display configuration
o
Special
: select a preset mode for display signal splitters (Analog Way DPH104, Matrox TH2GO
and DH2GO)
3.
If needed, select
Signal: HDMI
to force the HDMI signal on any DisplayPort output (adapter needed).
