AMX Vision 2, Operation/Reference Manual, Page: 108 / 128

Thumbnail Editor
98 Vision
2
Operation/Reference Guide
You can carry out the following actions on videos in the Selected Video Area:

Play video in thumbnail editor - hover over the video image to reveal a blue play icon. Click this
icon to go to the thumbnail editor and start the video playing (from the beginning). Note that if
someone is already playing/editing this video then you will see the following error message:
This message shows the username of the other user who is editing the video. Wait until they have
finished to proceed.

Show the thumbnails associated with video - Click Show Thumbnails to view all the thumbnails
associated with this video and the descriptive text associated with these thumbnails.

Remove video - Click the red cross in the top right hand corner to remove this video.
If you selected Show thumbnails you now have a list of thumbnails. Each thumbnail has an image, a time and
some descriptive text.

Time - time from start of video in (hours:minutes:seconds) of this thumbnail

Descriptive text - text describing what the thumbnail bookmarks

Image - thumbnail image
To play the video in the thumbnail editor screen starting at the point marked by this thumbnail proceed as
follows:
1.
Hover over the thumbnail image to reveal a blue play icon.
2.
Click the blue play icon, see FIG. 95. Note if someone is already editing this video then you will see the
error shown in FIG. 94:
FIG. 94 Error Message - Video Locked By Other User
FIG. 95 Play Video From Thumbnail Position