AMX Vision 2 Page 79 Operation/Reference Manual Download

Page: 79 / 128

Live (MPEG) Service

Vision

Operation/Reference Guide

Multicast Settings

The following options are available in the multicast section:

Encoding Settings

FIG. 66

MAX Encoder Multicast Settings

Multicast Settings Options

Protocol

The protocol setting is fixed at UDP multicast. UDP multicast is the only
supported protocol at this time.

Address

This is the multicast address that will be used. This option is pre-configured
and cannot be changed.

Port

This is the multicast port number that will be used. This option is
pre-configured and cannot be changed.

TTL

This is the multicast TTL that will be used. You can enter a value in the space
provided. This option is pre-configured and cannot be changed.

FIG. 67

MAX Encoder Encoding Settings

Summary of Contents for Vision 2

































































































































Search results

Summary of Contents for Vision 2

Reviews:

Related manuals for Vision 2

Brands by name

Popular brands

AMX Vision 2, Operation/Reference Manual

Search results

Summary of Contents for Vision 2

Reviews:

Related manuals for Vision 2

Brands by name

Popular brands