AMX Vision 2, Operation/Reference Manual

Page: 84 / 128

Live (WMV) Service
74 Vision
2
Operation/Reference Guide
Encoding Settings
The following options are available in the encoding section:
FIG. 71 WMV Encoder Encoding Settings
Encoding Settings Options
Enable Click to enable WMV streaming through the encoder.
Note: You will receive an error if you disable a Live channel while it is being
accessed by another service.
Multicast
Address This is the multicast address that will be used. This option is pre-configured
and cannot be changed.
Port This is the multicast port number that will be used. This option is
pre-configured and cannot be changed.
TTL This is the multicast TTL that will be used. You can enter a value in the space
provided. This option is pre-configured and cannot be changed.
Inputs
Video Input The encoder supports either S-Video, Component, or Composite video inputs.
Video Standard The encoder supports NTSC (USA and Japan) and PAL (rest of the world,
excluding France) video standards.
Aspect Ratio The encoder is supports a 4:3 and 16:9 aspect ratio.
Audio Input Select the audio input you want to use from the options menu.
Encoding
Encoder Profile Select the encoder profile you want to use.
Video CODEC Vision
2
supports only WMV video compression on the WMV encoder.
Video Resolution The encoder supports D1 (720 x 576 PAL / 640 x 480 NTSC) and SIF (360 x
288 PAL / 320 x 240 NTSC) resolutions.
Video Bitrate The encoder supports a range of selected video bitrates from 500 Kbits to 4
Mbits. The recommended encoding bitrate is 4 Mbits.
Video Mode The encoder supports Constant Bit Rate (CBR) and Variable Bit Rate (VBR)
modes. For multicasting, CBR is recommended as it produces a constant rate
over the network.
Audio Bitrate The encoder supports audio bitrates of 12K through 192K.
Audio Sample Rate The encoder supports audio sample rates of 32, 44.1, and 48K.
Channels The type of audio channel used by the encoder.