AMX Modero G5, Instruction Manual

Page: 129 / 144

SSH Commands
119 Modero G5 Touch Panels - Configuration and Programming
SSH Commands (Cont.)
ip (cont.)
--mode, -m
Set the connection mode. (DHCP, Static)
--reset, -r
Reset IP settings to factory default.
--subnetmask, -sm
The subnet mask address for the device
key Issue a keystroke to the system.
Syntax:
*:key [options] [keystroke]
Arguments:
keystroke: The keystroke to issue. (Multiple keystrokes may be included.)
Options:
--help
Display this help message
--info, -?
List available keystroke names
man Displays this help or help about a command.
Syntax:
*:man [command]
Arguments:
command
The command to get help for.
msg Enable/disable diagnostics message logging. An interactive menu is available when using the set
proxy (i.e. "set msg").
Syntax:
*:msg [options] [instruction] [filters]
Arguments:
instruction
Diagnostics message command instruction.
'once': display the diagnostics messages one time and exit
'on': enable diagnostics messages
'off': disable diagnostics messages
'filter': sets optional log filters (provided by filters argument)
'add': add optional log filters (provided by filters argument)
'remove': removed optional log filters (provided by filters argument)
'clear': clear optional log filters
'delete': delete current log filters
Optional log message filters (separated by spaces).
Options:
--add-filter, -af
Add a filter to the current diagnostics log filters.
--clear-filter, -cf
Remove all filters from diagnostics logging.
--clear-history, -ch, -d
Delete the diagnostics log history.
--config, -c, --set
Enable/disable diagnostics message output.
--filter, -f
Optional log message filter.
--help
Display this help message
--info, -?
Display current diagnostic message output status.
--off, -F, --disable, --stop
Disable diagnostics message output.