![background image](http://html1.mh-extra.com/html/amx/modero-cv7/modero-cv7_operation-reference-manual_2939251139.webp)
Firmware Pages and Descriptions
127
7" Modero Touch Panels
Wireless Settings Page - Security Options - EAP-TLS
EAP
(Extensible Authentication Protocol) is a Enterprise authentication protocol that can be used in
both a wired and wireless network environment. EAP requires the use of an 802.1x Authentication
Server, also known as a Radius server. Most of the configuration fields described below take variable
length strings as inputs. Whenever these fields are selected, an on-screen keyboard appears which allows
the string to then be entered.
TLS
(Transport Layer Security) was the original standard wireless LAN EAP authentication protocol.
TLS requires additional work during the deployment phase but provides additional security since even a
compromised password is not enough to break into an EAP-TLS protected wireless network
environment.
An EAP-TLS security method is designed for wireless environments where its necessary to securely
transmit data over a wireless network by adding an additional level of security protocol via the use of a
private key. Refer to the
EAP Authentication
section on page 193 for further details on these security
options. Refer to the
Using the Site Survey tool
section on page 59 for more information on using this
feature. Pressing the
EAP-TLS
button opens the EAP-TLS Settings dialog (FIG. 110).
FIG. 110
Wireless Settings page - EAP-TLS security method
Wireless Security - EAP-TLS Settings
SSID (Service Set Identifier):
The SSID is the unique name used on the WAP and then assigned to all
panels in a wireless network that are communicating to the same target WAP.
• This is required by the WAP before the panel is permitted to join the
wireless network.
• It is case sensitive and must not exceed 32 characters, which may be any
keyboard character. Make sure this setting is the same for all points in your
wireless network.
• This unique string identifies the network and is the same string for all users
on the same network.
• Use the on-screen keyboard’s
Clear
button to completely erase any
previously stored SSID information.
• Note: In all cases, the SSID of the WAP must be entered. If it is left blank,
the panel will try to connect to the first access point which can be found that
supports EAP. In this situation however, a successful connection is not
guaranteed because the identified WAP may be connected to a RADIUS
server which does not support the specified EAP type and/or may not have
the proper user identities configured.
Required Information:
- SSID (Network Name used by the Target WAP)
- Identity (similar to the Username used for network access)
- Client Certificate file (validates client (panel))
- Private Key and Private Key Password
Summary of Contents for Modero CV7
