![background image](http://html1.mh-extra.com/html/amx/modero-cv7/modero-cv7_operation-reference-manual_2939251126.webp)
Firmware Pages and Descriptions
114
7" Modero Touch Panels
Wireless Settings Page - Security Options - Static WEP
A Static WEP security method requires that both a target WAP be identified and an encryption method
be implemented prior to establishing an active communication session. In addition to providing both
Open and Shared Authentication capabilities, this page also supports Hexadecimal and ASCII keys.
Refer to the
Configuring a Wireless Connection
section on page 57 for further details on these security
options. Refer to the
Using the Site Survey tool
section on page 59 for more information on using this
feature. Pressing the
Static WEP
button opens the Static WEP Settings dialog (FIG. 102).
FIG. 102
Wireless Settings page - Static WEP security method
Wireless Security - Static WEP Settings
SSID (Service Set Identifier):
The SSID is the unique name used on the WAP and then assigned to all
panels in a wireless network that are communicating to the same target WAP.
• This is required by the WAP before the panel is permitted to join the
wireless network.
• It is case sensitive and must not exceed 32 characters, which may be any
keyboard character. Make sure this setting is the same for all points in your
wireless network.
• This unique string identifies the network and is the same string for all users
on the same network.
• Use the on-screen keyboard’s
Clear
button to completely erase any
previously stored SSID information.
WEP 64 / WEP 128:
Cycles through the available encryption options:
64 Bit Key Size or
128 Bit Key Size
.
Wired Equivalent Privacy is an 802.11 security protocol for wireless networks.
The WEP encryption method is designed to provide the "equivalent" security
available as in wireline networks.
•
WEP64
enables WEP encryption using a 64 Bit Key Size. In this case all
packets will be transmitted with their contents encrypted using the Default
WEP Key.
•
WEP128
enables WEP encryption using a 128 Bit Key Size. All packets are
transmitted with their contents encrypted using the Default WEP Key.
• If the key is not the correct size, the system will resize it to match the
number of bits required for the WEP encryption mode selected.
Required Information:
- SSID (Network Name used by the Target WAP)
- Encryption Method
- Passphrase
- WEP Key assignment
- Authentication Method
Summary of Contents for Modero CV7
