Wiring and Device Connections
11
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
INPUT SELECT Pushbuttons
The six backlit INPUT SELECT buttons (1-6) allow you to switch Video-only, Audio-only or Video+Audio
(FIG. 8).
Each numbered INPUT SELECT button is associated with the corresponding numbered Input on the rear
panel (refer to FIG. 4 on page 9):
These pushbuttons use multi color LEDs to indicate various states of input selection:
When you press an inactive input select button when not in a menu, the button lights
green
and activates the
audio and video for the source input. Pressing an INPUT SELECT button after pressing the VIDEO MENU
button activates only the video for the source input. Similarly, pressing the AUDIO MENU button followed by
an INPUT SELECT button activates only the audio on the source input.
After making your selection, the selected input type (Audio, Video, or both) is switched to the selected output
(see the
Video Settings
section on page 41 for details on selecting a video output), and the LED displays solid
with the corresponding color:
Blue = Video only
Yellow = Audio only
Green = Audio/Video
Magenta = Audio/Video, but video signal cannot be displayed
Red = Video only, but input signal cannot be displayed
FIG. 8
INPUT SELECT pushbuttons
Input Select Options
INPUT SELECT Button
Corresponding Input Connector
Input 1
VIDEO INPUT 1 (DVI-I connector)
Input 2
VIDEO INPUT 2 (DVI-I connector)
Input 3
VIDEO INPUT 3 (DVI-I connector)
Input 4
VIDEO INPUT 4 (DVI-I connector)
Input 5
UDM INPUT 5 (RJ45 connector)
Input 6
UDM INPUT 6 (RJ45 connector)
Push to select Input #6
Push to select Input #5
Push to select Input #4
Push to select Input #3
Push to select Input #2
Push to select Input #1
= Video only (blue)
= Audio only (yellow)
= Audio+Video (green)
= Audio+Video, but video signal
= Video, but input signal cannot be
cannot be displayed (magenta)
displayed (red)