Programming
73
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
AUDOUT_STEREO
Enables or disables audio
amp output in stereo
Syntax:
SEND_COMMAND <device>, "'AUDOUT_STEREO-<setting>'"
Variables:
setting = Stereo setting, either "ENABLED" or "DISABLED"
Example:
SEND_COMMAND dxDev,"'AUDOUT_STEREO-ENABLED'"
?AUDOUT_UDM
Queries to which audio
output the UDM audio
output is linked.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_UDM'"
Example:
SEND_COMMAND <DEV>, "'?AUDOUT_UDM'"
Returns a COMMAND string of the form: AUDOUT_UDM-<value>, in which
value is the audio output the UDM is linked to. (1: Audio AMP output, 2: Audio
Line output)
AUDOUT_UDM
Sets the UDM audio output
linked with which audio
output
The UDM is addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_UDM-<VALUE>'"
Variable
value = 1: Audio AMP output, 2: Audio Line output
Example:
SEND_COMMAND <DEV>, "'AUDOUT_UDM-1'"
?AUDOUT_VARIABLE
Requests the variable
setting on the audio port.
Queries to see if the audio port addressed by the D:P:S has the variable setting
enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_VARIABLE'"
Example:
SEND_COMMAND AUDIO_OUTPUT_2,"'?AUDOUT_VARIABLE'"
Returns a command in the form:
AUDOUT_VARIABLE-<ENABLED|DISABLED>.
AUDOUT_VARIABLE
Enables or disables the
variable setting on the audio
port.
Enables or disables the Variable setting on the audio port addressed by the
D:P:S. If enabled, the variable setting is on. If disabled, the variable setting is
off, which means it is fixed. This command is used on the audio Line Output port
(#2) to indicate if the Line Output is supposed to vary with the Amp Output (in
which case Variable=enabled) or if Line Output is fixed with respect to Amp
Output (in which case Variable=disabled, i.e. Fixed=enabled).
Syntax:
SEND_COMMAND <DEV>,"'AUDOUT_VARIABLE-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND AUDIO_OUTPUT_2,"'AUDOUT_VARIABLE-ENABLE'"
?EQUALIZER
Requests the equalizer band
on the audio output port.
Queries the equalizer setting of band <band> on the output audio port
addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?EQUALIZER-<band>'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'?EQUALIZER-1'"
Returns a COMMAND string of the form: EQUALIZER-<band>=<value>.