Programming
69
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
SEND_COMMANDS
The commands listed in the following sections are for the switcher only. For generic NetLinx commands, see
the
NetLinx Integrated Controllers WebConsole and Programming Guide
.
The commands derive their input/output port addressing from the target D:P:S.
INPUT ports range from 1-8 for Audio and from 1-6 for Video.
The extra ports 7 and 8 on the Audio subsystem represent MIC1 and MIC2 respectively.
Ports 5 and 6 are UTP inputs. Audio and Video functionalities are disambiguated from the
overlapped port numbers by combining them with the command name.
There are two Audio output ports (05002:1:0 and 05002:2:0).
Audio Output Port #1 is the Main Amp Output and most audio commands are addressed to this
port.
Audio Output Port #2 is the Line Output and normally tracks the Main Amp Output port with small
exceptions (For example, the AUDOUT_VARIABLE command.)
There are two Video output ports (05002:1:0 and 05002:2:0).
Video Output Port #1 is the DVI/Main Video Output port.
Video Output Port #2 is the RGB Output port.
Input and Output functional distinctions are disambiguated from the overlapped port numbers by
combining them with the command name.
The following table lists the port functionality mapping for the audio/video ports on the DVX-2100HD:
Port Functionality Mapping
05002:1:0
AUDIO/VIDEO input #1, AUDIO/VIDEO output #1
05002:2:0
AUDIO/VIDEO input #2, AUDIO/VIDEO output #2
05002:3:0
AUDIO/VIDEO input #3
05002:4:0
AUDIO/VIDEO input #4
05002:5:0
AUDIO/VIDEO input #5
05002:6:0
AUDIO/VIDEO input #6
05002:7:0
AUDIO MIC #1 input
05002:8:0
AUDIO MIC #2 input
05002:9:0
MACRO button/channel input