Programming
81
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Video SEND_COMMANDs (Cont.)
?VIDIN_RES_AUTO
Requests the status of the
auto resolution setting on
the video input port.
Queries to see if the video input port addressed by the D:P:S has its auto
resolution setting enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_RES_AUTO'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_RES_AUTO'"
Returns a COMMAND string of the form:
VIDIN_RES_AUTO-<ENABLED|DISABLED>.
VIDIN_RES_AUTO
Sets the status of the auto
resolution setting on the
video input port.
Enables or disables whether the video input port addressed by D:P:S is
supposed to have its resolution auto detected.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_RES_AUTO-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_RES_AUTO-ENABLE'"
?VIDIN_RES_REF
Requests the resolution of
the video input port.
Queries to resolution of the video input port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_RES_REF'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_RES_REF'"
Returns a COMMAND string of the form: VIDIN_RES_REF-<h>x<v>,<rate>.
VIDIN_RES_REF
Sets the resolution and
refresh rate of the video
input port.
Sets the resolution and refresh rate of the video input port addressed by D:P:S.
Invalid combinations are ignored by the SWITCHER.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_RES_REF
<horizontal>x<vertical>,<refresh-rate>'"
Variables:
horizontal = An integer value representing the horizontal.
vertical = An integer value representing the vertical. May have an additional
qualifier such as 'i' or 'p'.
refresh-rate = An integer value representing the refresh rate.
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_RES_REF 1440x480i,59'"
?VIDIN_SATURATION
Requests the saturation
level of the video input port.
Queries the input saturation of the video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_SATURATION'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_SATURATION'"
Returns a COMMAND string of the form: VIDIN_SATURATION-<value>.
VIDIN_SATURATION
Sets the saturation level of
the video input port.
Sets the input saturation of the video port addressed by the D:P:S to <value>.
Syntax:
SEND_COMMAND <DEV>, "'VIDIN_SATURATION-<value>'"
Variables:
value = 0..100
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_SATURATION-50'"
Sets the saturation of video input port (#1 based on D:P:S) to 50.