Cable Details and Pinout Information
33
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Cable Details and Pinout Information
Overview
The DVI-I Input connectors on the rear panel are used to connect source input devices to the DVX-2100HD
(FIG. 47). The DVX-2100HD routes video from connected source input devices to the connected output
device. Each connector supports DVI as well as RGBHV, S-Video, Composite, and Component inputs.
To connect non-DVI input source devices (S-Video, Composite, RGBHV, and Component) to the DVI Input
connectors, the following (optional) adapter cables are required:
DVI-D Male to DVI-D Male Single-Link Cable
Cable to be composed of the following:
Four UL20276 (28AWG twisted pair + drain wire + aluminum foil/mylar shield) for TMDS signals
and shields
Five UL1589 (28AWG) for DDC_CLK, DDC_DATA, Hot_Plug_Detect, +5VDC, and GROUND
The above bundles jacketed together in aluminum foil shield and 85% (minimum) braid
EMI shield metal can on both DVI connectors and connected to braid
FIG. 47
DVI Inputs
DVI Input Adapter Cables
Name
Description
Length
FG#
• CC-DVI-5BNCM
DVI-to-5 BNC Male
Note
: Used for RGBHV, Component, or Composite
inputs. When used for composite inputs, connect the
green plug on the adapter cable to the composite
video output jack on the source device.
6’ (1.828m)
FG10-2170-08
• CC-DVI-RCA3M
DVI-to-3 RCA Male
Note
: Used for Component or Composite inputs.
When used for composite inputs, connect the green
plug on the adapter cable to the composite video
output jack on the source device.
6’ (1.828m)
FG10-2170-09
• CC-DVI-SVID
DVI-to-S-Video
9’ (2.743m)
FG10-2170-10
• CC-DVIM-VGAF
DVI-to-VGA (up to 1920x1200)
6’ (1.828m)
FG10-2170-13
