![background image](http://html1.mh-extra.com/html/amx/enova-dvx-2100hd/enova-dvx-2100hd_operation-reference-manual_2939048076.webp)
AMXmeetingroom
65
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
AMXmeetingroom
The DVX-2100HD presentation switcher supports AMXmeetingroom. AMXmeetingroom (
FG3011-01
) is a
software application available for purchase separately which allows for a more simplified configuration of
your system by using a touch panel connected to a video output on the rear panel of the presentation switcher.
AMXmeetingroom contains an easy-to-use Configuration Wizard which enables you to supply information
about your system and its connections while AMXmeetingroom uses the information provided to create an
interface you can use to select devices and change settings. The AMXmeetingroom license is locked to the
presentation switcher, and it cannot be moved to another master.
AMXmeetingroom enables you to configure audio/video inputs and outputs, and switch between sources by
using a product-specific configuration web page served by the NetLinx Master web server. This page enables
you to perform the following:
Select the input format type for each video input
Select the output format type, resolution, and refresh rate for the video output
Select which video input is routed to the video output
Set the input gain and attenuation for each audio input
Set the maximum output level for the audio output
Adjust the volume, bass, mid-range, and treble
Select which audio input is routed to the audio output
AMXmeetingroom is delivered in a NetLinx token file (.TKN) and a password protected TPDesign4 touch
panel file (.TP4), both of which are downloadable from www.amx.com.
Communications
Touch Panel (“Panel”) and Master
– The NetLinx panel and master should be connected such
that they can communicate together.
Please refer to the NetLinx Studio online help or Operation/Reference Guide for additional details
regarding setting up the NetLinx master and touch panel.
Panel
– The touch panel must be set to device ID
10001
.
NI Controller
– The NetLinx controller must be set to device ID
5001
. The system number of the
master may be set as desired.
Load Master/Panel
Once the TKN and TP4 files have been downloaded from www.amx.com, you can load the files
from NetLinx Studio. Select File Transfer from the Tools menu, click Add, and select the "Other"
tab. Here you will select the appropriate file types and browse to the AMXmeetingroom file
locations.
Make sure to set the appropriate communications settings in Studio.
Follow the normal load process to send the files to the associated master and panel, setting the
proper device, port, and system
numbers.
If the Master and Panel are communicating properly, the
AMXmeetingroom application will begin on the License Key page.
You are ready to begin configuring your system.
Make sure to select the appropriate panel resolution for your specific touch panel.