Audio/Video Configuration
54
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
FIG. 56 displays the Audio page for the DVX-2100HD-T.
FIG. 56
WebConsole Configuration page - Audio tab (DVX-2100HD-T only)
1 -
Audio Input
: Select the corresponding option button to activate an incoming audio signal. You can only
select one audio input at a time. Select None if you do not want any audio.
2 -
Gain
: Use the slider to set the gain level for the selected audio input.
3 -
Stereo/Mono
: Click the appropriate option button to indicate whether the incoming audio signal is a stereo
or mono signal.
4 -
Microphone Mode
: Click Dual Mono when using independent microphones. Each mono microphone input
is mixed onto both the right and left channels. Click Single Stereo when connecting a single stereo source.
Microphone input 1 is mixed only onto the left channel and Microphone input 2 is mixed only onto the right
channel.
5 -
Phantom Power
: Click the check box to activate phantom power for the mic. The unit supports a supply of
up to 48V of phantom power for each mic input.
Note
: Enabling Phantom Power could damage some devices connected to the microphone input if the devices
are not designed to accept it.
6 -
Enable
: Click the checkbox to activate the microphone.
7 -
Limiter
: Click the checkbox to activate the limiter function which suppresses loud noise bursts from
dropping the mic and helps avoid feedback noise.
1
2
3
4
5
6
8
7
9
10
11
14
15
13
12