Programming
85
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
System SEND_COMMANDs
The following table lists the System SEND_COMMANDs available for the DVX-2100HD:
Front Panel SEND_COMMANDs (Cont.)
INTENSITY_LCD
Sets the LCD display light
intensity
Sets the intensity of the lighting/brightness of the LCD screen that is part of the
Front Panel.
Syntax:
SEND_COMMAND <DEV>, "'INTENSITY_LCD-<intensity-value>'"
Variables:
intensity-value = An integer value in the range of 0-100 with 0 being no
illumination and 100 being maximum illumination.
Example:
SEND_COMMAND SWITCHER,"'INTENSITY_LCD-50'"
Sets the intensity of the LCD screen on the Front Panel to 50.
?INTENSITY_LEDS
Query front panel light
intensity.
Queries the intensity setting of the LED buttons on the Front Panel.
Syntax:
SEND_COMMAND <DEV>, "'?INTENSITY_LEDS'"
Example:
SEND_COMMAND SWITCHER,"'?INTENSITY_LEDS'"
Returns a COMMAND string of the form: INTENSITY_LEDS-<value>.
INTENSITY_LEDS
Sets the front panel light
intensity
Sets the intensity of the lighting/brightness of the LED buttons that are part of
the Front Panel.
Syntax:
SEND_COMMAND <DEV>, "'INTENSITY_LEDS-<intensity-value>'"
Variables:
intensity-value = An integer value in the range of 0-100 with 0 being no
illumination and 100 being maximum illumination.
Example:
SEND_COMMAND SWITCHER,"'INTENSITY_LEDS-50'"
Sets the intensity of the LED buttons on the Front Panel to 50.
Front Panel SEND_COMMANDs
?DSP_FWVERSION
Requests the audio DSP
firmware version.
Queries the version of the audio DSP firmware of the switcher.
Syntax:
SEND_COMMAND <DEV>, "'?DSP_FWVERSION'"
Example:
SEND_COMMAND SWITCHER,"'?DSP_FWVERSION'"
Returns a COMMAND string of the form: DSP_FWVERSION-<version>.
?FGPA_FWVERSION
Requests the video FPGA
firmware version.
Queries the version of the video FPGA firmware of the switcher.
Syntax:
SEND_COMMAND <DEV>, "'?FPGA_FWVERSION'"
Example:
SEND_COMMAND SWITCHER,"'?FPGA_FWVERSION'"
Returns a COMMAND string of the form: FPGA_FWVERSION-<version>.
?FWVERSION
Query for the device
firmware version.
Syntax:
SEND_COMMAND <DEV>,"'?FWVERSION'"
Example:
SEND_COMMAND dvDev,"'?FWVERSION'"
Returns a COMMAND string of the form: FWVERSION-<version>.