![background image](http://html.mh-extra.com/html/amx/dxlink/dxlink_instruction-manual_2938738078.webp)
NetLinx Programming of DXLink Transmitters and Receivers
78
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
NetLinx Programming of DXLink Transmitters
and Receivers
Overview
Important:
Before DXLink TXs and RXs can receive any NetLinx SEND_COMMANDs, the DIP switch’s
#3 Toggle must be set to ON or the devices will not be accessible from a NetLinx control system.
The DXLink Transmitters and Receivers recognize a select number of SEND_COMMANDs and CHANNELs.
Receiver Video SEND_COMMANDs – page 80
Receiver Audio SEND_COMMANDs – page 82
Transmitter Video SEND_COMMANDs – page 83
Transmitter Audio SEND_COMMANDs – page 87
IR SEND_COMMANDs and CHANNELs – page 88
SERIAL SEND_COMMANDs – page 92
Transmitter USB SEND_COMMANDs – page 94
Receiver USB SEND_COMMANDs –
page 94
Common DXLink Transmitter / Receiver SEND_COMMANDs – page 95
DXLink System SEND_COMMANDs – page 96
SEND_STRING Escape Sequences – page 97
Also provided in this chapter are DXLink SEND_COMMANDs specifically for Enova DVX Switchers (see page 98).
Note:
For a listing of all supported Telnet commands, see page 110.
Device Numbering and Ports
Each DXLink Transmitter and Receiver has its own Device Number (which is assigned when the unit is bound to a
Master) and the following ports.
Transmitters and Receivers (Modules)
Port 1 – Serial
Port 2 – Not used
Port 3 – IR TX
Port 4 – IR RX
Port 5 – USB
Port 6 – Video/Audio Output
Port 7 – Video/Audio Input
Port 8 (Multi-Format TX only) – Analog Video Input
Transmitters (Wallplate TX and Decor Wallplate TX)
Port 1 – Serial
Port 2 – Not used
Port 3 – Not used
Port 4 – Not used
Port 5 – USB
Port 6 – Video/Audio Output
Port 7 – Video/Audio Input
Port 8 – Analog Video Input
For an example of port numbering, see the NetLinx Studio illustration in FIG. 39 on the next page.