Product Overview and Specifications
14
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Common Applications
DXLink Transmitters and Receivers are designed to send audio, video, and control to a remote display across the
room, on the other side of the house, or to a classroom down the hall. The installation’s requirements dictate the
system setup which generally takes one of the following three forms.
Endpoint Mode (Switcher)
– One or more Transmitters and/or Receivers are connected to a switcher*
containing an integrated Master (see page 38).
Endpoint Mode (Standalone)
–
A standalone DXLink TX/RX pair** are connected directly to each other
but, in addition, either the TX or RX is connected to a NetLinx Central Controller via a LAN or directly to the
Controller (see page 40).
Extender Mode (Standalone)
– A standalone DXLink TX/RX pair** are connected directly to each other as
a simple extender solution (see page 41).
* The switcher can be either an Enova DGX Switcher or an applicable Enova DVX Solution (see page 12).
** A wallplate in a standalone configuration requires power via a DXLink power injector.
Transmitters
Note:
If a DVI-D signal is used (via a DVI-to-HDMI cable adapter), the advanced audio support from HDMI
will not be available.
DXLink Multi-Format TX (AVB-TX-MULTI-DXLINK) Front View
DXLink HDMI TX (AVB-TX-HDMI-DXLINK) Front View (product discontinued)
FIG. 1
Multi-Format TX front view
FIG. 2
HDMI TX front view
Digital Video and Audio LEDs
Power LED
CEC LED
IR LEDs
232 (serial) LEDs
NetLinx LEDs
USB LED
ID Pushbutton
Analog Video LEDs
Program port
Digital Video and Audio LEDs
Power LED
CEC LED
IR LEDs
232 (serial) LEDs
NetLinx LEDs
USB LED
ID Pushbutton
Program port
