Product Overview and Specifications
25
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Common Features/Functionality
This section covers the DIP switches, the USB port, HDCP compliance, and IR functionality.
DIP Switches
Tip:
For easiest access to the DIP switch toggles, we recommend setting them before installation.
A four-toggle DIP switch is on the bottom of the DXLink Modules, on the rear of the Wallplate TX, and on the
front of the Decor Wallplate TX (the front can be covered with a customer provided standard decor style front
cover plate).
#1 Toggle is used for enabling/disabling the physical ICS LAN 10/100 port (see page 44).
#2 Toggle is used for setting the DXLink Modules to either automatically or manually determine the DXLink
Mode (see page 44).
#3 Toggle is used for enabling/disabling network connectivity of the DXLink Transmitter or Receiver to a
connected NetLinx Central Controller (used for IR ports, serial ports, and commands to the DXLink unit);
see page 45.
#4 Toggle is not functional.
Note:
The mounting bracket on the Wallplate TX must be removed (unscrew the four screws from the bracket
and set it aside) before the DIP switch toggles can be set.
For complete information on setting DIP switches (including settings for common scenarios), see the section
starting on page 43.
FIG. 10
DIP switch location on DXLink Modules
FIG. 11
DIP switch on Wallplate TX (remove mounting bracket) and on Decor Wallplate TX
Transmitter
Receiver
DIP switch
DIP switch
Decor Wallplate TX
Wallplate TX
