![background image](http://html.mh-extra.com/html/amx/dxlink/dxlink_instruction-manual_2938738015.webp)
Product Overview and Specifications
15
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Components located on front of Multi-Format TX and HDMI TX (left to right):
Power LED
–
Indicates when the Multi-Format TX or HDMI TX is powered on.
Digital Video and Audio LEDs
–
Indicate the presence of digital video and digital audio signals, including an
embedded audio signal on the HDMI path.
Analog Video LEDs (
Multi-Format TX only
)
–
Indicate the type of analog video present through the
Multi-Format TX: composite or Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS.
Program port
–
This port (USB mini-B connector) supports DGX Configuration Software for programming
a customer VGA EDID.
IR LEDs – TX and RX LEDs indicate active IR communication.
232 LEDs (RS-232 serial) – TX and RX LEDs indicate active serial communication.
NetLinx LEDs – Link/Act LED indicates network communication activity. The Status LED indicates unit
status.
CEC LED – CEC is not currently supported.
USB LED – When illuminated, the LED indicates that the USB port is connected and enabled (for details,
see page 27).
ID Pushbutton – Places the Multi-Format TX or HDMI TX in ID Mode for setting the NetLinx ID (device
only) and provides additional functionality, such as placing the device in Static IP Mode or DHCP Mode.
Multi-Format TX and HDMI TX LEDs
Note:
For detailed behavior of the NetLinx Link/Act and Status LEDs on the module’s front, see page 62.
For detailed behavior of the RJ-45 connector LEDs on the module’s rear, see page 50.
Multi-Format TX and HDMI TX Indicator LEDs
LED
Normal Display
Indicates
Power
Green
Power is applied to the Transmitter Module
Digital Video
Green
A digital video signal is present through the Transmitter Module
Audio
Green
Embedded audio signal is present through the Transmitter Module
Analog Video
(Multi-Format TX only)
One of the 3 LEDs
will be Green
The type of analog video present through the Multi-Format TX:
• C (composite) or Y/c (two component)
• Y/PB/PR or RGB (three component)
• RGBHV (five component) or RGBS (four component)
IR TX
Red
IR TX active communication
IR RX
Yellow
IR RX active communication
232 (Serial) TX
Red
Serial TX active communication
232 (Serial) RX
Yellow
Serial RX active communication
NetLinx Link/Act
Green
Active LAN connection to an AMX Network (Blinking = #3 Toggle OFF)
NetLinx Status
Green
LAN connection is active
CEC
OFF
CEC is not currently supported
USB
Yellow
USB port is connected and enabled (for details, see page 27)