![background image](http://html.mh-extra.com/html/amx/dxlink/dxlink_instruction-manual_2938738017.webp)
Product Overview and Specifications
17
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
DXLink Decor Wallplate TX (AVB-DWP-TX-MULTI-DXLINK) Front View
Components located on left and right front sections of Decor Wallplate TX:
USB Host port – Mini-B USB connector (supports USB host) for receiving keyboard / mouse commands
from a specific RX. (For USB port information, see page 26.)
Audio In Stereo
–
Audio connector is a 3.5 mm stereo jack. An analog audio signal is only available when
HDMI embedded digital audio is not present (or configured for analog audio).
Video In – An HD-15 connector for analog video: C (composite), Y/c, Y/Pb/Pr, RGB, RGBHV, or RGBS.
Pinouts for analog video are on page 124.
HDMI In – HDMI connector (with locking center screw) for digital video and embedded digital audio
(supports a DVI-D signal with use of DVI-to-HDMI cable adapter). When more than one audio signal is
present, HDMI embedded audio takes precedence over analog audio.
Power LED
–
Indicates when the Decor Wallplate TX is powered on.
Audio LED
–
Indicates the unit is configured to pass analog audio (coupled with digital or analog video
path).
Analog Video LEDs
–
Illuminates when the Decor Wallplate TX is configured to pass analog video:
composite or Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS.
Digital Video LED
–
Illuminates when the Decor Wallplate TX is configured to pass HDMI with embedded
audio (default).
The Decor Wallplate TX has a number of front panel components, some can been seen when a standard decor
style front cover plate is attached and some are hidden by the plate (FIG. 4 shows all of them). The cover plate is
customer provided to allow matching the individual decor of an environment or matching other standard decor
covers in a room/area.
Components located on center front section of Decor Wallplate TX:
USB Program port
–
This port (USB mini-B connector) supports DGX Configuration Software for
programming a customer VGA EDID.
Reset button
–
Resets Decor Wallplate TX’s CPU (acts like power cycle soft reboot)
.
Dip switch – A four-toggle DIP switch is used for enabling/disabling special functionality (see page 43).
ID Pushbutton – Places the Decor Wallplate TX in ID Mode for setting the NetLinx ID (device only) and
provides additional functionality, such as placing the device in Static IP Mode or DHCP Mode.
DXLink LEDs
–
HDCP LED indicates HDCP status; DXLink LED indicates that a valid DXLink connection
has been established.
NetLinx LEDs
–
Status LED indicates unit status; Link/Act LED indicates network communication activity
.
FIG. 4
Decor Wallplate TX front view (before customer provided standard decor style front cover plate is attached)
Analog Video LEDs
HD-15 Input
Digital Video LED
Audio LED
HDMI Input
USB Host
Stereo Audio Input
Power LED
Reset button
Program port
ID Pushbutton
DXLink LEDs
DIP switch
NetLinx LEDs
Cover plate screw hole
Back box screw hole