![background image](http://html.mh-extra.com/html/amx/dxlink/dxlink_instruction-manual_2938738135.webp)
Appendix G – Ground Wire Attachment
135
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
2.
Remove the jackscrew and silver washer above the HDMI connector.
3.
Secure the ring terminal of the ground wire against the chassis with the jackscrew and washer.
4.
Ensure the ground wire is positioned so that it does not interfere with any of the connectors.
5.
Attach the ground wire to a common earthed ground (see “Attaching a Ground Wire to a Common Earthed Ground”
on the previous page).
6.
Continue the installation process (or reapply power to the module).
FIG. 44
Remove jackscrew and washer above HDMI connector
FIG. 45
Position ground wire away from connectors
Remove jackscrew and washer
Correctly positioned ground wires