Programming Manual
http://www.remotecontrol-express.com
-
TEL :
+44 (0) 207 399 7782 - FAX :
+44 (0) 207 927 3151
BFT Clonix 2E
Assembly of your receiver:
1.
Unplug your motor. Verify that you have a 12V or 24V feed with an alternating or direct
current. Connect the feed between the “–” and “+” terminals (you don’t have to respect any
direction if the feed is alternating). If the feed is stronger, you will have to install an adapter.
2.
Connect the first channel between the CH1 terminals.
3.
Connect the second channel between the CH2 terminals.
Please note: there are several ways to connect your receiver, either as a replacement for an old
receiver (check the compatibility of your remote controls with your new receiver), or in parallel with
the current receiver (example):
4.
Your new receiver is programmed.
