![background image](http://html.mh-extra.com/html/amx/dxlink/dxlink_instruction-manual_2938738034.webp)
Product Overview and Specifications
34
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
* Interlaced video is supported into the Transmitters; progressive is only supported out of the Receiver unless it is in
Scaler Bypass mode.
AMX reserves the right to modify its products and their specifications without notice.
HDMI Video Specifications (continued)
Input Voltage (nominal)
1.0 Vpp differential
Input Re-clocking (CDR)
Yes
Input Equalization
Yes, adaptive
Input Connector
HDMI Type A female
Propagation Delay (typical)
5
μ
s
RX Output
Output Signal Type
• HDMI
• DVI-D (Single Link with a DVI-to-HDMI cable adapter)
Output Scaling
SmartScale
®
, Manual Configuration, Bypass
SmartScale
®
Output Resolution
Support
All resolutions between 480p and 1920x1200 @ 60 Hz via automatic SmartScale
®
query of the display’s preferred EDID detailed timing definition
Output Voltage (nominal)
1.0 Vpp differential
Output Re-clocking
Yes
+5 V DDC Pin Output
50 mA when using DXLink power, 500 mA when using local 12 V supply
+5 V USB Output
150 mA when using DXLink power, 500 mA when using local 12 V supply
Output Rise Time / Fall Time
425 ps typical (20% to 80%)
Output Connector
HDMI Type A female
Propagation Delay (typical)
25 ms when scaling; 5
μ
s when in Bypass mode
HDMI Audio Synchronization
Video formats @ 60 Hz frame rate: In Scaling mode, audio leads video by 11 ms
typical (3 ms to 19 ms). In Bypass mode, audio lags video by 14 ms.
Analog Video Specifications
DXLink Multi-Format TX, Multi-Format Wallplate TX, and Decor Wallplate TX
Compatible Formats
• RGBHV, RGBS, RGsB
• Y/Pb/Pr (HDTV)
• Y/c (S-Video), C (Composite)
Progressive Resolution Support
480p up to 1920x1200 @ 60 Hz (supported resolutions are shown in the
manual's “Supported Input Resolutions” appendix)
Interlaced Resolution Support*
480i, 576i, 1080i (supported resolutions are shown in the manual's
“Supported Input Resolutions” appendix)
Auto-Adjust Input
Supported
RGB Input Signal Level Range
1 Vpp nominal
RGB Input Impedance
75 ohm
HV Sync Input Signal Level Range
2 to 5 Vpp
HV Sync Input Impedance
2.5 pF typical, 10 pF max.
Digital Processing
24 bit, 165 MHz
Y/Pb/Pr Input Signal Level Range
• 1.0 Vpp for Y
• 700 mVpp for Pb, Pr
Y/Pb/Pr Input Impedance
75 ohm
Y/c (S-Video) Input Signal Level Range
• 1.0 Vpp for Y
• 1.0 Vpp for c
Y/c (S-Video) Input Impedance
75 ohm
C (Composite) Input Signal Level Range
1.0 Vpp
C (Composite) Input Impedance
75 ohm
Connector
HD-15 (breakout cable required for non-RGB formats)