20
USER MANUAL
DCP-MTX
8. SET-UP & CONTROL
DCP-MTX is designed with ease of connection and control in mind. When the device
is connected and powered on, you can choose the optimal way to control the unit at
your convenience, through either MYTURN button on the front panel, Telnet, or Web UI
specifically designed for DCP Series.
8.1 MYTURN
The MYTURN (
) button on the front panel can be used to activate/deactivate
MYTURN mode, select input signal or execute IP sequencing for a DCP system.
NOTE:
When DCP-MTX is in Auto Switch mode, MYTURN button will remain effective while
used for selecting active input signal.
1. Execute IP Sequencing for a Chain/Ring Mode Connection
After connection of multiple DCP-MTXs in Chain or Ring Mode, long press MYTURN
button of the first DCP-MTX for 10 seconds will start IP sequencing.
1) Long press MYTURN button of the first DCP-MTX, or DCP-MTX 1 in the chart
below, in the connection system for 10 seconds;
2) The input LEDs (HDMI IN, DP IN & VGA IN ) of DCP-MTX 1 will flash twice.
3) Then DCP-MTX 1 will start IP sequencing automatically and the rest DCP-MTXs
will get their individual IP address according to their sequence in the connection
loop (for instance, if DCP-MTX 1 gets 192.168.1.121 (Default IP address of DCP-
MTXs), then DCP-MTX 2 will get 192.168.1.122.)
DCP-MTX 1
DCP-MTX 2
DCP-MTX 3
192.168.1.121
192.168.1.122
192.168.1.123
Long press
(10 seconds)
Input LEDs flash twice after
pressing MYTURN for 10 seconds
2. Select Active Input Signal from HDMI IN, DP IN and VGA IN (or Activate MYTURN)
A short press of MYTURN button will select active signal among HDMI IN, DP IN and
VGA IN ports.
DCP-MTX 3
HDMI
DP
VGA
Input Signal
in active use
DCP-MTX 3
HDMI
DP
VGA
DCP-MTX 3
HDMI
DP
VGA
Short press
Short press
Next active input
signal will be used
Next active input
signal will be used