29
USER MANUAL
DCP-MTX
You are free to change the network setting when multiple devices are connected to
avoid IP conflicts.
NOTE:
The DCP device will automatically reboot after the network setting is changed.
Video
The Video sub-menu is used to perform the following functions:
• Auto Switch
• HDCP
• EDID
1) Auto Switch
The Auto Switch section enables or disable Auto Switch of the DCP-MTX.
If Auto Switch is turned ON:
• If a new input source signal is detected, DCP-MTX will automatically switch to use
the new input signal.
• If an active source is removed or its output is disabled, DCP-MTX will
automatically switch to another active input signal by checking its priority (Priority
from the highest to the lowest: HDMI IN, DP IN, VGA IN).
• If the power is interrupted and then restored, DCP-MTX will automatically use the
last input source signal before the power interruption.