manualshive.com logo in svg

AMX DCP-MTX, User Manual, Page: 33 / 52

Share
Download
AMX DCP-MTX User Manual Download Page 33

33

USER MANUAL

DCP-MTX

•  Hex String: Switch the button ON to turn the RS232 commands to Hexadecimal 

format. 

•  End Flag: Click to choose the end flag for the RS232 commands. 

•  Command: Key in a user-defined command for controlling the device.

8.2.2.3 Advanced

The Advanced section includes Welcome Menu, Password, System, Fireware and 
allows you to customize your own logo for your Web UI pages, set up a new login 
password, reset or reboot the DCP-MTX settings, enable/disable automatic logout from 
Web UI and upgrade firmware of your DCP-MTX device. 

Welcome  Menu

The Welcome Menu section is for you to customize your own logo for the DCP Web UI.

•  Browse: Click to browse for the customized logo or image. 
•  Upload: Click to upload the new logo or image. 
•  Clear: Click to remove the logo or image in use. 

NOTE: 

The new logo or image should be in PNG format and no more than 292x80 pixels.

Password

The Password section allows you to set a new password for logging in the DCP Web 
UI. 

•  Apply: Key in a new password, then click the button to take effect. 

Summary of Contents for DCP-MTX





















































Reviews:

No comments