30
USER MANUAL
DCP-MTX
If Auto Switch is turned OFF, please use the MYTURN button on the front panel to
select desired input signal.
2) HDCP
The HDCP section allows you to enable or disable HDCP compatibility for HDMI IN and
DP IN. By default, HDCP is switched ON for both HDMI IN and DP IN.
NOTE:
Please verify your display’s HDCP compatibility before enabling or disabling the
function.
3) EDID
By default, the EDID setting of DCP-MTX is in
1920 x 1080@60Hz 2CH
mode (the EDID
DIP switch is set to
0 0 1 0
).
To adjust EDID settings of DCP-MTX through Web UI, please manually set the EDID
switch on the front panel to
1 0 0 1
.
Control
The Control sub-menu is used to perform the following functions:
• CEC Controller
• RS232 Controller
• RS232 Pass-through
1) CEC Controller
DCP-MTX is embedded with a CEC controller and will automatically power on/off the
display connected to its HDMI OUT port when CEC Auto Control is switched on.
Above all, for CEC control of DCP-MTX to be effective, the display connected should
support CEC over HDMI.