21
USER MANUAL
DCP-MTX
For a Chain or Ring Mode DCP system, a short press of the MYTURN button will
activate the device’s MYTURN Mode and show its active signal through its local display
(if there’s any)and downstream displays (for a Chain Mode connection) or all displays
(for a Ring Mode connection).
•
Auto Switch Mode:
if the DCP-MTX selected is in Auto Switch Mode, the first
detected input signal (HDMI IN
→
DP IN
→
VGA IN) will be in active use immediately
after the short press of its MYTURN button.
•
Manual Mode:
if the DCP-MTX selected is in Manual Mode, short press its MYTURN
button again to toggle among its active signals from HDMI IN, DP IN and VGA IN ports.
Input Signal in active use
First active signal of DCP-MTX y will be in use (Auto Switch Mode)
Or short press MYTURN again to toggle among active signals (Manual Mode)
DCP-MTX x
HDMI
DP
VGA
HDBT
HDBT
HDBT
DCP-MTX y
HDMI
DP
VGA
DCP-MTX z
HDMI
DP
VGA
DCP-MTX x
HDMI
DP
VGA
HDBT
HDBT
HDBT
DCP-MTX y
HDMI
DP
VGA
DCP-MTX z
HDMI
DP
VGA
Short press
3. Select Signal from HDBT IN (or De-Activate MYTURN)
Long press of MYTURN button for 3 seconds will select signal from HDBT IN for DCP-
MTX.
DCP-MTX 3
HDMI
DP
VGA
Input Signal
in active use
Long press
(3 seconds)
HDBT
DCP-MTX 3
HDMI
DP
VGA
HDBT input
will be used
HDBT