11
USER MANUAL
DCP-MTX
6. APPLICATION & INSTALLATION
6.1 Typical Application
DCP-MTX equips with a number of input and output ports for multi-type signal
transmission, can be used as a transmitter or receiver and easy meet various
installation requirements.
DCP-MTX can help build up Chain-mode (with/without local display) and Ring-mode
connection and support grouping of one or several DCP-MTX sub-system.
Application 1: Chain Mode (without Local Display)
In the Chain Mode without local display, DCP-MTXs connected to sources work as
transmitter (DCP-MTX 1, DCP-MTX 2 and DCP-MTX 3 in the diagram below), whereas
DCP-MTXs connected to displays receive and output signals through its local display
(DCP-MTX x, DCP-MTX y and DCP-MTX z in the diagram below).
Activate any of the “transmitter” DCP-MTXs’ MYTURN button, displays connected to
“receiver” DCP-MTXs will display the activated device’s active signal.
Example:
if DCP-MTX 3’s MYTURN is activated, Display x, y and z will present active
signal from DCP-MTX 3.
Chain Mode Connection (without local display)
DCP-MTX 1
DCP-MTX 2
DCP-MTX x
DCP-MTX y
SOURCE 1
SOURCE 2
DCP-MTX 3
SOURCE 3
DISPLAY x
DISPLAY y
HDBaseT
HDBaseT
HDBaseT
HDBaseT
DCP-MTX z
DISPLAY z
HDBaseT
Application 2: Chain Mode (with Local Display)
In the Chain Mode with local display, DCP-MTXs work as both/either transmitter and/or
receiver.
When any of the “transmitter/receiver” DCP-MTXs is MYTURN activated, the display
connected to it and displays connected to the downstream DCP-MTXs will present
active signal from the MYTURN-activated device.
Example:
if DCP-MTX 3 is MYTURN activated, Display 3 to z will show active signal
from DCP-MTX 3; Display 1 and 2 will not show the signal from DCP-MTX 3.