![background image](http://html.mh-extra.com/html/amx/axd-ca10/axd-ca10_instruction-manual_2937573024.webp)
Designing Touch Panel Pages
20
10.4" Touch Panels
3.
Press
ENTER
to save the device number, close the keypad, and return to the Button Properties
page.
4.
Press
CHAN
to open the keypad and enter a channel value of 1 - 255. The source code uses the
channel code number to identify the button and its programmed operations. The channel code
for non-active buttons is 0.
5.
Press
ENTER
to save the channel number, close the keypad, and return to the Button Properties
page.
Setting the variable text code
The variable text buttons set the device and button channel codes for the buttons.
1.
Press
DEV
to open the keypad and set the device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The source code uses device codes 1 - 4 to identify the touch
panel.
3.
Press
ENTER
to save, close the keypad, and return to the Button Properties page.
4.
Press
CHAN
to open a keypad and set the channel number.
5.
Enter a channel value of 1 - 255 in the keypad. The source code uses the channel code number
to identify the button and its operations.
6.
Press
ENTER
to save the channel number, close the keypad, and return to the Button Properties
page.
Setting the page flip
1.
Press the
PAGE FLIP T
YPE
button (FIG. 14) in the Button Properties page to open the
P
AGE
F
LIP
T
YPE
menu.
2.
Select a Page Flip type. If you select
FLIP PREVIOUS
in the
P
AGE
FLIP T
YPE
menu, the
FLIP
TO
P
AGE
button appears.
3.
Press the
FLIP
TO
P
AGE
button (FIG. 14) to open a list of all the saved touch panel pages. If the
desired page is not present in the menu, check to verify the page has been saved.
4.
Select the target page for the page flip.
If DEVICE USED is set to 4 and Base Device Number is 128, the Controller recognizes
bus devices 128 - 131.
The panel will not allow you to enter a device number greater than the DEVICE USED
without first displaying a decision box asking if you accept the new selection or not.
FIG. 14
Page FLIP Type button
Flip to Page button
Page FLIP type
button
Summary of Contents for AXD-CA10
Page 1: ...instruction manual Touch Panels and Accessories 10 4 Touch Panels Firmware version G3 ...
Page 17: ...Installation 13 10 4 Touch Panels ...
Page 18: ...Installation 14 10 4 Touch Panels ...
Page 28: ...Designing Touch Panel Pages 24 10 4 Touch Panels ...